美国Cooper，LXT600-6000inlb 扭矩传感器

扭矩传感器是将扭矩转换成比例电信号的负载传感器。Cooper Instruments提供旋转式（以不同转速360度运行）或仅反应式（最高可运行360度）。库珀仪器提供各种物理配置和扭矩范围从10英寸到10万英寸磅。

A torque cell is a load transducer that will convert a torsional moment into a proportional electrical signal. Cooper Instruments offers a rotating variety, (operates in 360 degrees at various RPM) or a reaction-only style (can operate up to 360 degrees). Cooper Instruments offers a variety of physical configurations and torque ranges from 10 inoz to 100,000 in lbs.

品牌：美国Cooper

型号：LXT600-6000inlb

类别：扭矩传感器

 

基本特征BASIC FEATURES：

·设计用于扭矩审计和校准

·可在各种扭矩范围内使用

·坚固的不锈钢结构

·可适应任何测试情况

·通过六针bendix连接输出

·designed for torque auditing and calibration

·available in a variety of torque ranges

·sturdy stainless steel construction

·can be adapted to any test situation

·output by means of a six-pin bendix connection

 

规格Specifications：

量程Capacity – inlb	6000英寸磅
额度输出RATED OUTPUT	额定2 mV/V
安全过载SAFE OVERLOAD	额定输出的150%
零点平衡ZERO BALANCE	额定输出的±1%
励磁电压EXCITATION VOLTAGE	20 Vdc或Vac
桥电阻BRIDGE RESISTANCE	700欧姆
非线性NONLINEARITY	额定输出的±0.1%
滞后HYSTERESIS	额定输出的±0.1%
非重复性NONREPEATABILITY	额定输出的±0.2%
工作温度OPERATING TEMPERATURE	-60至200℉（-50至92℉）
重量WEIGHT	46盎司（1.3千克）
H英寸（mm）H inches (mm)	3.43（87.1）
方传动Square Drive	3/4
扭转刚度（in-lb/rad）Torsional Stiffness (in-lb/rad)	1.7 x 106英寸

产品描述

TDF系列600反作用扭矩传感器使用方便机械扭矩扳手和其他用于生产和自动化的扭矩敏感装置装配应用程序。美国制造的17-4不锈钢铝盖，这种坚固的装置可以通过它的法兰，并耦合到任何方驱动仪表以获得精确的扭矩测量。它的多功能外壳设计可定制对任何测试情况，及其使用的金属箔应变片技术确保精确测量。不同的扭矩范围容量是提供不同尺寸的方形驱动器和法兰配置。输出通过Bendix六针PTO6E-10-6P插头。可选的提供配套插座。

The TDF Series 600 Reaction Torque Sensors allow easymonitoring and calibration of mechanical torque wrenches andother torque-sensitive devices used in production and automated assembly applications. Made in the USA of 17-4 stainless steel with an aluminum cover, this sturdy device can be mounted anywhere by means of its flange, and coupled to any square-drive instrument for accurate torque measurement. Its versatile housing design allows it to be customized to any test situation, and its use of metal foil strain gauge technology

assures accurate measurements. Different torque range capacities are available, as are different sized square drives and flange configurations. Output is by means of a Bendix six-pin PTO6E-10-6P plug. Optional mating receptacle available.