产品类别
称重测力传感器
8455新葡萄娱集团am及变送器
速度及加速度传感器
料/液位计
位移传感器
扭矩传感器
温湿度传感器,变送器
显示控制仪表
记录仪
整列机
测力系统
微粒子检测仪
激光器
流量传感器/开关
陀螺仪
引伸计
频闪仪
变送器/放大器/接线盒
变频器
编码器
试验机
数据采集器
角度传感器
声级计
振动计
多通道分析仪
流量计
电子衡器
实验室设备
水分分析仪
质量流量计
测试分析系统
模块型仪表
静电纺丝机
高速数据采集卡
Tinius Olsen测试设备
试验机
信号调理器
Sirius数据采集系统
切割设备
三维扫描仪
示波器
水听器
功率放大器
安全保持器
温度计监视器
振动增幅器
人像表面温度热像仪
温度检查器
红外线 辐射温度仪
红外多分析仪
FC评价试验装置
电缆
加速度传感器
碳气溶胶组分在线分析系统
黑碳仪
接线盒
显示器
隔离器/转换器
打印机
拧紧机
液氮罐
PKD-3放大器
品牌:美国Transducer Techniques
型号:PKD-3
类别:放大器
简要说明
PKD-3模块对数据电平的变化提供非常快速的响应,并捕获给定监视器窗口中出现的最高峰值。与微处理器控制的仪表以每秒三个采样转换数字读数,然后保存最高读数不同,PKD-3连续跟踪,并以模拟形式保持,直到复位。该模块具有极性选择和复位控制,可以从模块的前缘操作,也可以通过将TTL控制线切换到地面进行远程操作。
The PKD-3 Module provides very fast response to variations in data level and captures the highest peak that occurs in a given monitor window. Unlike microprocessor controlled meters that convert in digital readings at three samples per second and then save the highest reading, the PKD-3 tracks continually and holds in analog form until reset. The module has polarity select and reset control which can be operated from the front edge of the module or remotely by switching TTL control lines to ground.
PKD-3的典型应用是TMO-3和扭矩传感器与自动螺母转轮一起使用。当转轮失速时,可以节省峰值扭矩。如果系统评估需要回退转矩,则可以通过计算机将模块重置为零并改变极性。
A typical application for the PKD-3 is with a TMO-3 and a torque transducer used with an automatic nut runner. When the runner stalls, peak torque is saved. If backoff torque is needed for system evaluation, the module can be reset to zero and the polarity changed, both by computer.
规格:
输入范围Input Range
0-±5 VDC
输入范围Output Range
0-±5 VDC
响应时间Response Time
小于0.5ms
复位时间Reset Time
最小50ms
下垂时间Droop
小于2mV/分钟
控制力Power
从TI0-3000主板