DSP-3放大器PDF资料：

品牌：美国Transducer Techniques

型号：DSP-3

类别：放大器

说明

DSP-3被设计成一个模块，用于监视TMO-3或SUM-3模块的关键传感器数据，该窗口通常与以下信号相关：低于正常值（黄色）、进入范围或可接受（绿色）和高于可接受值（红色）。前端LED提供这种状态，输出继电器也提供这种状态。该窗口由高、低电位计设置，设置值显示在TIO-3000仪表上，通常以工程单位显示，如它所跟踪的传感器通道。输出继电器可用于驱动较大的外部报警装置或关闭导致不可接受水平的过程或活动。

The DSP-3 is designed as a watchdog module to monitor critical sensor data from a TMO-3 or SUM-3 Module. The window is normally associated with signals such as: below normal (yellow), go range or acceptable (green), and above acceptable (red). Front edge LED’s provide this status, as do output relays. The window is set by a high and low potentiometer, with set values displayed on the TIO-3000 meter, usually in a engineering unit like the sensor channel it is tracking. Output relays can be used to drive larger external alarm devices or to switch off the process or activity that is causing the unacceptable level.

选项

11毫秒响应

规格：